Whether you live in a stone or wooden house, you will agree with me that a nicely painted room is fundamental to improving the general look of your house. Indeed, minor decorations in your room are capable of transforming the overall appearance of your house significantly.
It is also true that we spend more than half a day in our homes. For this reason, it is imperative to ensure we make them as comfortable as possible. The best way to ensure our rooms are looking great is to paint, decorate, or add some designs.
When designing your home, you may want to paint your ceilings. Check out our helpful guide here on how to paint a ceiling.
Step 1- Clear the Room
This is perhaps the most important thing to do before conducting any form of painting. Ensure your room is empty by clearing out any movables. Failure to do so, you might end up stumbling over something and risk either hurting yourself or spilling paint all over.
Move as much furniture as you can to another empty room or put them outside for a while and return them when you are done. What’s more, if possible, you can also try rolling up the carpet. If you have fixed appliances that may be too heavy to carry, you can cover them with cartons or polythene sheets.
Step 2- Fix Holes and Remove Fixtures From Your Ceiling
If you want to achieve exceptional results, you should first eliminate any available default on your ceiling. Besides, if you intend to paint the ceiling, you should ensure you remove obstacles such as shelves and cupboards that might block or obstruct your access to the ceiling.
Also, you might want to remove fixtures such as light pendant fittings that you don’t want to paint. Note that you don’t have to remove the whole light fixture completely.
You can unscrew the cover without tampering with the wires. You will not only avoid working with bare live wires but also get enough room to paint as far as you can.
That’s not all! Ceiling repairs should be done at this stage. Before you move the lead to open your paint, you should ensure you have completely sealed off any holes on your ceiling. You can also get rid of any unnecessary fixtures at this stage.
Step 3- Clean Out the Stains
Smoke or dirt coatings can easily stain your ceiling. Ensure you cover them from beneath before proceeding to the next step.
Step 5- Open Your Can
Finally, you can now start painting. If you follow all the above steps as required, you will be ready to open your tin and add color to any ceiling design. Also, it is important to ensure you have the best paint for better results. Pour a little paint into a smaller container and wipe out any drips or spills on your container as you paint.
Step 6- Start With a Cut-In
Using a stepping tool, a ladder, or a wooden box, ensure you place yourself in a comfortable position near the ceiling. Start with the edges of the ceiling — where the ceiling meets with the wall. Carefully dip your paintbrush in the paint and wipe it against the side of the container to remove any excess paint.
What’s more, ensure you have the correct size of the brush to avoid having difficulty dipping it in the container. Hold the brush firmly at the edge of the ceiling and carefully move the brush as you transfer the paint from the brush to the ceiling. Also, don’t worry about the paint dripping on your wall. You can carefully wipe it with a cloth while it is still wet.
Step 7- Load Your Roller
The best way to paint a ceiling is by using a roller. Take out your roller, damp it with some water, and pour some paint on it. Note that the importance of damping your roller is to avoid working with dried up paint. Dip the roller into the paint and firmly roll it back and forth on the ceiling.
You can continue rolling upon an area of about two to three feet before dipping the roller in the paint again. When the paint runs out on the roller, you will notice that it will leave paint lines, ensure you feather out the edges to eliminate all the lines.
The best way to achieve better results using a roller is to move it back and forth then side to side onto the adjacent areas to eliminate any patterns. Besides, it is also advisable to bend the overlap into each other when painting a ceiling by ensuring the area being covered on does not dry.
Step 8- Leave it to Dry
After covering all the above steps, you can now rest as you wait for it to dry. Leave it to dry for an hour or two — preferably two. Also, you should ensure you proceed to the next step only when your paint has completely dried. If you apply an overcoat when it is not dry, you’ll risk lifting the first coat away.
Step 9- Apply the Second Coat
Follow the step you used to apply the first coat on the second coat. Note that the application of the second coat is necessary to ensure you cover the little spots that you missed on your first coating. In case you find that the spots are still visible, you can go ahead and apply the third or fourth coat — if need be.
Step 10- Clean Your Tools
Now that you are done with your painting and have that glamorous look you were hoping to achieve, it is necessary to ensure you clean everything. Put your rollers and brush in a tin with a little detergent, and gently wash them.
Rinse them and leave them in the sun to dry. Additionally, don’t forget to pour any unused paint back into the original container and carefully place the lid back for future use.
Do We Need to Learn How to Paint a Ceiling?
Yes, there is no better way to achieve the appearance we want in our homes than to have a lovely painting on our ceiling. Besides, based on the above guide, there is no doubt that you can comfortably learn how to paint a ceiling and do it yourself.
After all, who doesn’t love to play with a little paint? Do you desire to own an exquisite real estate property? Check us out for a guide on prime properties for sale and more real estate topics.
